Trusted Heating, Cooling, Electrical & Water Heater Services in Flat Rock, MI

Successfully completed installation of a 3-ton air conditioning system with matching evaporator coil in rear-discharge configuration. Performed all mechanical and electrical connections, including refrigerant line installation with proper brazing techniques, reconnection of existing ductwork, and final system startup to verify proper operation.

Responded to no cooling complaint on 10+ year old outdoor HVAC unit. Upon arrival, performed diagnostic inspection of outdoor condensing unit and accessed internal electrical compartment. Inspected capacitor, contactor, and all electrical connections for proper operation. Noted unit showed signs of age with accumulated debris in base of compartment. Replaced existing thermostat inside home with new user-friendly thermostat provided by family member to improve ease of operation for homeowner. Verified all wire connections secure and properly terminated. Documented equipment condition with photos showing capacitor, contactor assembly, and wiring configuration. Discussed system age and potential need for replacement unit consideration with homeowner given equipment is beyond typical service life expectancy.

Performed estimate visit for HVAC system replacement. Documented existing outdoor air conditioning condenser unit mounted on concrete pad with visible weathering and dirt accumulation, along with electrical disconnect boxes and conduit connections. Assessed indoor Distinctions brand furnace installation in utility area with associated PVC venting, ductwork, and filter housing. Photographed both outdoor and indoor equipment to provide comprehensive system evaluation for replacement proposal.

# No Cool Service Call - 12-Year-Old AC System Responded to service call for reduced cooling capacity on 12-year-old air conditioning system. Customer reported unit was struggling to maintain temperature during peak heat conditions, though system remained operational. Upon arrival, performed visual inspection of outdoor condensing unit located in backyard. Discovered heavily corroded fuse block with significant copper terminal oxidation and green patina formation indicating prolonged moisture exposure and age-related deterioration. Removed fuse block assembly for detailed examination, confirming advanced corrosion on both copper terminals and compromised electrical connections. Conducted electrical diagnostics using digital multimeter to verify system performance parameters. Measured capacitor microfarad rating at 47.6 µF to assess component condition and determine if capacitor degradation was contributing to reduced cooling efficiency. The combination of corroded electrical connec

Completed full HVAC system installation at residential property. Installed new furnace and air conditioning equipment in basement utility area with proper ductwork integration, condensate pump assembly, and PVC drainage piping. All components tested and operational, financing paperwork finalized, and job site documentation photographed upon completion.

Provided estimate for air intake installation on furnace system to improve indoor air quality and combustion efficiency. Assessed existing HVAC setup in basement utility area, including furnace unit, ductwork configuration, and ventilation requirements. Quoted installation of proper fresh air intake system to ensure adequate combustion air supply and optimize furnace performance while meeting current code requirements.

Conducted estimate for air conditioning replacement at property with 21-year-old natural gas furnace currently non-operational. Assessed basement mechanical room containing existing HVAC equipment, ductwork configuration, and utility connections including water heater proximity to determine replacement specifications. Documented existing system layout, available clearances, and installation requirements for complete AC system replacement proposal.

Completed replacement of manufactured home furnace with new 70,000 BTU unit. Installation included all mechanical and electrical connections, gas line hookup with flexible yellow corrugated connector, and thermostat programming. New furnace features control board, blower motor assembly, gas valve, and all safety components properly installed and tested. Unit commissioned and verified operational with thermostat set to 75°F.

Completed installation of 2-ton air conditioning system with evaporator coil at rear location. Installed new condensing unit on concrete pad with proper refrigerant line connections using gray insulated linesets. Performed electrical reconnection and mechanical startup procedures. Verified system operation with digital manifold gauges, confirming proper refrigerant pressures and temperatures. System tested and operational upon completion.

Performed assessment of existing R-22 air conditioning system found to be low on refrigerant and requiring capacitor replacement. Due to age of equipment and cost considerations, provided comprehensive estimate for complete AC system replacement rather than repair of obsolete unit. Documented existing HVAC equipment configuration including Rheem furnace installation and current mechanical room layout.

Responded to no airflow complaint affecting one bedroom in mobile home while rest of house maintained normal heating and cooling operation. Conducted system diagnostics including electrical testing of outdoor unit showing 14.7V reading and visual inspection of indoor refrigerant lines and heat exchanger assembly. Determined airflow restriction was localized to single zone with all visible supply vents in open position. Advised that bedroom furniture placement, specifically bed positioning, was likely obstructing return air pathway or blocking supply register, preventing proper air circulation to affected room. Recommended relocating bed away from vents to restore adequate airflow distribution throughout ductwork system.

Conducted on-site evaluation for complete furnace replacement at residential mobile home property. Assessed existing HVAC system including outdoor air conditioning unit and electrical connections, documented current equipment configuration and installation requirements. Customer referred by family member, provided detailed estimate for furnace replacement with applicable referral discount applied to quoted price.

Responded to no cooling call on aging air conditioning system. Upon arrival, found unit not operating with thermostat displaying 89°F. Performed diagnostic testing and discovered failed dual run capacitor preventing compressor and condenser fan operation. Verified incoming line voltage at 120.1V to condensing unit. Removed defective capacitor from outdoor unit compartment and installed new dual run capacitor with proper microfarad ratings for both compressor and fan motor. Reconnected all electrical terminals, tested system operation, and confirmed unit cycling properly with normal amperage draw. System restored to full cooling operation.

Responded to callback for incomplete condensate drain line installation in crawl space. Successfully located and connected the flexible condensate line to proper drainage point, ensuring proper pitch and secure connections throughout the run. Verified system operation with no leaks detected and condensate flowing freely to designated drain location.

Provided comprehensive estimate for complete HVAC system replacement including outdoor air conditioning unit and indoor furnace with 15-year-old existing equipment currently non-operational. Assessed exterior condensing unit positioned on concrete pad adjacent to electrical disconnect and meter, along with basement furnace installation located near water heater with existing ductwork infrastructure. Documented equipment specifications and site conditions for whole system replacement proposal.

Completed installation of 3-ton air conditioning system at rear location of property. Performed all mechanical and electrical connections required for proper system operation. Conducted vacuum test using digital micron gauge to verify system integrity, achieving proper vacuum levels below 500 microns. Charged system with refrigerant to manufacturer specifications using manifold gauges, verifying proper pressures on both high and low sides. Reconnected all electrical and refrigerant lines, ensuring secure connections at all fittings. System tested and confirmed operational with appropriate temperature differential and proper cycling.

Conducted on-site assessment for replacement of non-functional outdoor air conditioning unit. Evaluated existing aged equipment and property conditions, including natural gas fuel system configuration. Generated multiple estimate options (quotes 03788-05, 03788-06, and 03788-08) for complete AC system replacement, documenting current thermostat operation showing indoor temperature at 79°F with cooling setpoint of 72°F, and photographed existing gas meter infrastructure to ensure proper coordination with new equipment installation.

Responded to service call for club AC maintenance rescheduling request. Performed electrical diagnostics on air conditioning system, measuring amperage draw of 29.1 amps AC and recording voltage reading of 5.06 volts on system components. Documented equipment conditions and electrical parameters for maintenance records.

Responded to club maintenance call for air conditioning unit producing grinding noise during shutdown cycle. Upon arrival, conducted diagnostic inspection of the system to identify source of mechanical noise and assess overall unit operation.

Responded to no cooling complaint on Goodman AC unit. Upon arrival, performed diagnostic inspection of outdoor condensing unit. Visually inspected equipment exterior, verified manufacturer labeling and unit specifications. Documented current condition of equipment showing normal environmental weathering. Checked electrical connections and observed wiring configuration at outdoor unit. Unit assessed as part of agreement visit maintenance protocol.