Trusted Heating, Cooling, Electrical & Water Heater Services in Flat Rock, MI

Installed ground fault circuit interrupter (GFI) outlet with weatherproof cover on exterior wall. Ran gray PVC conduit vertically along white vinyl siding to protect wiring from environmental exposure. Mounted outdoor-rated electrical box with clear hinged weatherproof cover to allow access while maintaining protection from moisture and weather elements. Verified proper grounding and tested GFI functionality to ensure compliance with electrical safety standards for outdoor receptacles.

Completed scheduled AC club maintenance visit during morning service window. Performed comprehensive system inspection of evaporator coil and blower assembly. Documented heavy condensation and frost accumulation on copper refrigerant lines at evaporator coil, indicating potential airflow restriction, low refrigerant charge, or metering device issue requiring further evaluation. Inspected blower wheel assembly and verified squirrel cage fan condition with all blades intact and motor shaft properly secured. System photographed for maintenance records showing current operating conditions.

Responded to callback regarding excavation from recent AC installation that extended into adjacent property. Backfilled trench with soil, compacted material, and covered disturbed area with wood chips to match surrounding landscape. Verified HVAC condenser unit remained properly positioned and all associated ductwork connections were secure following remediation work.

Completed prepaid air conditioning maintenance tune-up during scheduled morning service window. Performed comprehensive system inspection and standard maintenance procedures on residential AC unit. Documented plumbing components and condensate drain line configuration in utility area, noting PVC drainage assembly with proper connections and functional condition.

Completed scheduled preventive maintenance agreement visit for air conditioning system. Performed comprehensive inspection of evaporator coil and heat exchanger fins, documenting equipment condition with photographic records. Inspected flexible ductwork and refrigerant line insulation in confined mechanical space, verifying proper installation and system integrity. All components found operational with normal dust accumulation consistent with routine use.

Completed prepaid AC maintenance tune-up as part of membership agreement. Performed comprehensive system inspection on Daikin DM96VC0803BNAA furnace unit (Serial: 171013739), documented equipment specifications including 60,000 BTU/HR high fire and 42,000 BTU/HR low fire ratings, verified electrical connections at 115 volts, and inspected flexible ducting and ventilation components for proper operation and integrity.

Completed full HVAC system installation including a 70,000 BTU furnace and 2-ton air conditioning unit positioned on the left side of the property. Installed new 240V electrical circuit to support the equipment, ensuring proper power supply and code compliance. Added whole-home humidifier to the system for enhanced indoor air quality and comfort control. The outdoor condenser unit was mounted on a concrete pad in the side yard area with proper clearances maintained from the building structure. Refrigerant lines were routed from the outdoor unit to connect with the indoor air handler, with appropriate insulation applied to prevent condensation and maintain system efficiency. All connections were brazed, pressure tested, and evacuated before charging the system to manufacturer specifications. Interior installation included mounting the furnace and configuring the ductwork connections in the attic space. Installed insulated refrigerant lines running through the ceiling structure with pr

Completed prepaid AC maintenance tune-up on residential air conditioning system. Performed comprehensive inspection of indoor air handler unit, including blower wheel assembly and evaporator coil access. Inspected outdoor condensing unit components, refrigerant lines, and electrical connections. Verified proper airflow through blower assembly, checked filter condition, and documented equipment model SA7414 specifications. All system components operating within normal parameters with no immediate repairs required at time of service.

Completed comprehensive HVAC replacement estimate for residential system upgrade. Assessed existing furnace and air conditioning equipment in basement mechanical room, documenting current installation configuration including ductwork routing, clearances, and equipment placement. Provided multiple quote options for complete system replacement to address aging equipment and improve heating and cooling efficiency.

Responded to no-cool call on AC unit that was completely inoperable since customer move-in with suspected wiring issues. Upon arrival, inspected exterior disconnect box and found improper electrical connections with visible wiring concerns. Documented electrical disconnect configuration and internal component condition with photos for service records. Unit age unknown at time of service, requiring further diagnostic evaluation to determine full scope of electrical repairs needed for system restoration.

Conducted on-site assessment for HVAC system replacement and provided detailed estimate. Documented existing electrical infrastructure, including Square D electrical panel with 100-amp main breaker and associated circuit distribution system. Photographed current electrical service configuration to ensure proper compatibility with proposed HVAC equipment specifications. Discussed referral program opportunities with property owner during scheduled appointment window.

Completed prepaid AC maintenance tune-up as part of membership benefits. Performed comprehensive system inspection of outdoor condensing unit, measured electrical parameters using clamp meter with readings at 326.1, verified proper amperage draw and electrical connections. Inspected condenser coil fins, fan operation, and all external components. System operating within normal parameters with no immediate concerns identified.

Conducted complimentary estimate for complete HVAC system replacement at residential property. Assessed existing outdoor air conditioning condenser unit with gray casing and black metal grid covering, mounted on concrete pad adjacent to building exterior with refrigerant lines and electrical conduit running along cream-colored brick wall. Evaluated basement heating system and existing infrastructure, noting exposed floor joists, ductwork routing, and current mechanical system layout. Provided comprehensive pricing options for new air conditioning unit and furnace replacement to meet homeowner's comfort needs. Documented existing equipment conditions and installation requirements through photographic records of outdoor condenser unit positioning and basement mechanical space configuration.

Completed annual AC maintenance inspection as part of prepaid membership agreement. Performed comprehensive tune-up including inspection of electrical control panel, capacitors, and CoreSense monitoring system. Verified all wire connections, tested capacitor functionality, and documented equipment condition with photos. All components operating within normal parameters with no immediate repairs required.

Completed on-site evaluation for HVAC system replacement at a mobile home residence. Assessed existing outdoor condensing unit mounted on concrete pad with proper electrical disconnect and evaluated indoor air handler/furnace unit installed in utility closet. Provided comprehensive quote options for both single component air conditioning replacement and complete system replacement to address customer's cooling and heating needs.

Conducted on-site assessment of mechanical space for water heater replacement estimate (WH2-4). Evaluated existing installation conditions including ductwork configuration, support structure clearances, concrete floor accessibility, and proximity to existing utilities and piping systems to determine proper equipment sizing, venting requirements, and installation specifications for proposed water heater unit.

Responded to no cooling call on 10+ year old air conditioning system. Upon arrival, customer reported white foam discharge from line set when unit was activated. Inspected outdoor condensing unit and found failed contactor with visible arcing damage and deteriorated contacts. Contactor showed signs of age-related wear with accumulated debris and compromised spring mechanism. Replaced defective contactor with new unit, verified proper electrical connections at disconnect box, and confirmed all wire terminations were secure. Tested system operation and verified unit now cooling properly with no abnormal discharge from refrigerant lines.

Completed seasonal air conditioning and system inspection maintenance visit under CLUB AC 12-4 agreement. Performed comprehensive system evaluation including blower assembly inspection, confirmed proper operation of all components, and documented equipment condition with photographic records. All equipment found operating within normal parameters with no immediate service needs identified.