Let’s face it—when something stops working at home, it’s usually at the worst possible time. Maybe the AC kicks out just when guests are on their way, or your water heater runs cold right in the middle of your shower. These moments aren’t just annoying—they throw your whole routine out of sync. That’s where Iceberg Heating & Cooling steps in. We bring Southeast Michigan homeowners the kind of service we’d want for our own homes: prompt, straightforward, and hassle-free. Whether it’s your furnace, breaker panel, or air quality system that needs attention, our Newport home services get things back to normal without the sales pitch or guesswork. See the Iceberg difference for yourself by calling (586) 232-9474 or contact us online.
Reliable Heating & Cooling Services in Newport
The weather in Newport isn’t known for being predictable. One week, you’re cranking the heat; the next, you’re flipping the thermostat to cool. Your HVAC system has to handle it all—and when it can’t, that’s when we step in. Iceberg’s certified HVAC technicians in Newport are ready to tackle any heating or cooling challenge with real solutions that make sense.
- Furnace Repair & Installation – No heat? No problem. We work on all furnace types and install high-efficiency models to keep you warm without sky-high energy bills.
- Boiler Services – Steam and hot water boilers require specialized care—we’ve got the experience to service or replace them safely.
- AC Repair & Installation in Newport – Whether your AC is leaking, frozen up, or just not cooling the way it used to, we’ll diagnose the issue and offer repair or replacement options that match your budget.
- Heat Pump Services – These energy-saving systems do double-duty year-round. We install and maintain heat pumps for consistent performance.
- Ductless Mini-Split Installation – Great for additions, garages, or rooms that never seem quite right. Mini-splits offer targeted comfort without the need for ductwork.
- Newport HVAC Tune-Ups & Maintenance – Seasonal tune-ups catch problems early, improve energy efficiency, and keep your home consistently comfortable.
Efficient Newport Water Heater Services
It’s hard to overstate how much we rely on hot water—until it’s gone. If your water heater is leaking, taking forever to heat up, or not heating at all, Iceberg’s water heater technicians can help. We offer complete repair, replacement, and maintenance services for both tank and tankless systems.
- Tankless Water Heater Maintenance – Prevent scale buildup and keep your on-demand hot water running efficiently with regular descaling and system checks.
- Annual Flushing Service – Tank water heaters need flushing to remove sediment and maintain performance—our team can handle it quickly and cleanly.
- Water Heater Repair – We troubleshoot temperature fluctuations, pilot light issues, strange noises, and more.
- Tank & Tankless Water Heater Installation – Whether you need a quick replacement or want to upgrade to a high-efficiency tankless model, we’ll help you choose the right system.
Safe & Modern Electrical Services in Newport
Your home’s electrical system powers everything—from the fridge and coffee maker to your laptop and home office. So when something shorts out or stops working, it’s not just an inconvenience—it’s a disruption. Our licensed electricians serve Newport homeowners with careful, code-compliant work that’s safe and built to last.
Electrical Panel Upgrades
If your current panel is outdated or frequently tripping, we’ll install a modern system that meets your home’s growing power needs.
Outlet & Switch Installation
Whether it’s an outlet that won’t hold a plug or a switch that sparks, we’ll make it safe and functional again—or install new ones where you need them.
Home Rewiring
Replacing old or damaged wiring protects your home from potential fire hazards and improves energy reliability.
Whole-Home Surge Protection
Prevent unexpected voltage spikes from damaging your electronics and appliances with panel-mounted protection.
Lighting Installation
From statement lighting to motion-activated security fixtures, we’ll install the right lights in the right places.
Ceiling Fan Installation
Improve airflow and reduce energy costs with properly installed ceiling fans.
Smart Home Setup
Ready to control your thermostat, lights, or security from your phone? We’ll get your smart tech installed and synced up.
EV Charger Installation
Make charging your electric vehicle at home easier and safer with a professionally installed Level 2 charger.
Breathe Cleaner with Newport Indoor Air Quality Services
You might not always see it, but the air in your home could be affecting your health and comfort more than you realize. Dry air, lingering odors, and allergy flare-ups are often signs of poor indoor air quality. Our IAQ services help clear the air so you can breathe easy again.
- Humidity Control Systems – Whether the air in your home feels too dry in the winter or overly sticky in the summer, our whole-home humidifiers and dehumidifiers help keep moisture levels just right for better comfort and easier breathing.
- Advanced Air Filtration – Dust, pet hair, pollen, and other airborne particles don’t stand a chance with our high-efficiency filtration systems. These systems help you breathe cleaner air and can even reduce allergy symptoms.
- UV Air Purification – Our UV purifiers use powerful yet safe ultraviolet light to neutralize harmful bacteria, viruses, and mold that may be circulating in your HVAC system, creating a healthier environment in every room.
- Duct Cleaning & Sealing – Over time, dust and debris collect inside your ductwork, while tiny leaks can waste energy and spread allergens. Our duct cleaning and sealing services restore airflow, reduce irritants, and help your HVAC system perform more efficiently.
Why Southeast Michigan Homeowners Choose Iceberg Heating & Cooling
Choosing a home service company shouldn’t feel like rolling the dice. At Iceberg, we take pride in being the team you can trust to show up, speak honestly, and treat your space with the same care we’d want in our own homes. No gimmicks, no rushed jobs—just reliable, respectful service from people who genuinely care about doing things right.
- Local, licensed technicians who care
- Flat-rate, honest pricing with no surprises
- Same-day appointments available
- Friendly, respectful service every time
- Trusted in Monroe County and across Southeast Michigan
Book Your Newport Home Service with Iceberg Today
If your AC is making weird noises, your furnace won’t kick on, or your lights are flickering again, don’t wait until it gets worse. Reach out to Iceberg Heating & Cooling and get the reliable, local help you need. From HVAC to water heaters and everything in between, we’re the team Newport homeowners trust to do the job right the first time. Schedule your service today by calling (586) 232-9474 and experience home comfort without the hassle.
Recent Jobs and Reviews in Newport , MI
Job Locations and Reviews
Completed preventive maintenance agreement visit on air conditioning system. Performed comprehensive inspection of electrical components and control wiring, verifying all connections were secure and properly terminated at the control board. Measured and recorded system amperage at 7.29 amps, confirming equipment is operating within normal parameters for the unit specifications.
# HVAC Service Completion Report Responded to no cooling complaint on 10+ year old air conditioning system. Upon arrival, performed diagnostic evaluation of outdoor condensing unit and associated electrical components. Inspection revealed failed contactor assembly preventing compressor and condenser fan operation. Contactor showed significant aging, corrosion on terminal connections, and carbon buildup on contact points consistent with extended service life. Electrical connections at contactor displayed discoloration and oxidation. Disconnect box examination showed aged wiring with weathered insulation throughout electrical pathway. Replaced defective contactor with new OEM-equivalent component rated for system specifications. Cleaned and tightened all electrical terminations at contactor mounting location and disconnect box. Verified proper voltage supply at disconnect. Energized system and confirmed compressor and condenser fan motor startup. Monitored unit through complete cooli
Responded to no-cooling emergency call on 20-year-old AC system that tripped breaker and produced smoke from outdoor unit the previous evening. Upon arrival, found outdoor condenser unit with significant debris accumulation, deteriorated wiring connections, and evidence of electrical failure in compartment. Inspected electrical components and wiring harness, which showed severe weathering, contamination, and heat damage consistent with reported smoking incident. Documented compromised condition of unit including rust, organic debris buildup around electrical connections, and overall lack of maintenance contributing to system failure. Due to age of equipment and extent of damage to electrical components, recommended system replacement rather than repair given safety concerns and cost-effectiveness for 20-year-old unit operating beyond typical lifespan.
Responded to no cooling complaint on residential HVAC system. Upon arrival, inspected control board and wiring connections as customer suspected control board failure. Documented system information including A2L refrigerant safety classification label and control board terminal connections. Verified multiple wire terminations at control board including power, thermostat, and component connections. All wiring appeared properly secured to terminal block with appropriate color coding for circuit identification.
Completed full HVAC system installation in mechanical space, including 110,000 BTU furnace, whole-home humidifier, and 4-ton air conditioning unit with rear discharge configuration. Installed new air handler unit between structural framing with proper mounting and leveling, routed PVC condensate drainage lines along equipment, and connected flexible metal conduit for electrical service to wall-mounted disconnect switch. Reconnected all electrical components per code requirements, secured wiring with appropriate clips and supports, and installed flexible ductwork connections to existing duct system.
Provided estimate for complete HVAC system replacement to address existing air conditioning unit experiencing freeze-up issues after two hours of operation. Current equipment is over 20 years old and located in basement alongside natural gas furnace, requiring evaluation for full system upgrade to restore proper cooling performance and improve overall efficiency.
Conducted comprehensive HVAC system evaluation for undercharged R22 system. Identified critical concerns with heat exchanger requiring immediate attention. Documented existing ductwork configuration and humidifier installation with photographic evidence. Provided detailed replacement estimate for system components due to age of refrigerant type and compromised heat exchanger condition.
# AC Repair - No Cool Condition Responded to service call for air conditioning system blowing warm air. Upon arrival, performed diagnostic testing using digital multimeter to check electrical components and verify proper voltage and capacitance readings. Identified faulty component within the control circuit affecting system operation. Accessed electrical control panel and performed necessary wiring repairs, utilizing proper wire connectors to ensure secure connections. Replaced defective component with red, yellow, and blue wire leads, ensuring all connections met manufacturer specifications and electrical code requirements. Verified all wire terminations were tight and properly secured within the control panel enclosure. Completed electrical testing to confirm proper system operation and restored cooling function. System operating normally upon departure.
Completed preventive maintenance agreement visit for Club AC8-12 service on air conditioning and system inspection. Performed comprehensive electrical diagnostics using calibrated digital multimeter, recording voltage readings at 49.0V to verify proper system operation and electrical integrity. Inspected and documented all electrical connections, wiring bundles, and control components within the equipment enclosure, confirming all connections were secure with proper cable management and labeling in place. All system components including capacitors, terminal blocks, and wiring harnesses were found in good operating condition with no visible signs of wear, corrosion, or damage requiring immediate attention.
Completed comprehensive tune-up service on 7-year-old furnace and central air conditioning system in mobile home as part of Comfort Club membership maintenance. Performed full inspection of indoor blower assembly, noting dust accumulation on squirrel cage blower wheel and housing requiring cleaning during service. Measured outdoor condensing unit amperage at 8.15 amps, confirming proper compressor operation within manufacturer specifications, inspected condenser fan motor and coil condition, and verified all electrical connections and refrigerant pressures were within normal operating parameters for both heating and cooling systems.
Responded to no-cool call on 6-year-old residential AC system with no airflow. Upon arrival, found outdoor condensing unit heavily soiled with debris accumulation and leaf matter around base, restricting proper airflow to coil. Cleared debris from unit perimeter and exterior surfaces, inspected electrical connections and capacitor function, verified proper operation of condenser fan motor and compressor. System restored to normal cooling operation with adequate airflow after cleaning and verification of all components.
Responded to no-cool complaint on 20-year-old AC system with condenser icing issues. Performed system diagnostics including airflow verification, replaced dirty air filter, and took electrical measurements at outdoor unit. System suspected to be low on refrigerant based on icing symptoms and reduced efficiency, though unit remains operational.
Completed comprehensive air conditioning tune-up on 20-year-old system. Performed standard maintenance procedures including filter inspection, refrigerant level check, electrical connection testing, condensate drain clearing, and thermostat calibration to ensure optimal system performance for the cooling season.
Responded to no-cool call on residential air conditioning unit over 10 years old. Upon arrival, found outdoor condensing unit had been knocked over by wind, resulting in damaged electrical wiring and disconnected connections. Unit was physically repositioned and leveled on pad, electrical connections were repaired and secured, and system was tested to verify proper operation and cooling restoration.
# HVAC Maintenance Visit - Ice Buildup on Outdoor Coil Responded to service call for ice accumulation on outdoor condenser coil. Upon arrival, found AC&SI unit with significantly restricted airflow due to heavily clogged condenser coils. External coil surfaces showed substantial debris buildup consisting of dirt, dust, and organic material that was impeding proper heat transfer and causing abnormal ice formation. Connected Fieldpiece SMAN digital manifold gauges to service ports to assess system pressures and temperatures. Initial diagnostics revealed operating conditions consistent with restricted airflow across condenser. Temperature readings displayed 306.5°F and 13.8°F at respective measurement points, indicating system imbalance. Performed thorough cleaning of condenser coils to remove accumulated debris and restore proper airflow. Cleared both intake and discharge sides of coil assembly to ensure unrestricted air circulation. Unit was positioned on concrete pad with gravel sur
Completed Club AC8-12 preventive maintenance agreement visit on air conditioning system. Performed comprehensive system inspection including electrical testing with multimeter to verify proper voltage and amperage readings, which measured at 5.5 on the digital display. Inspected blower assembly and squirrel cage fan wheel, confirming all blades were intact and properly secured to motor housing. Unit operating within normal parameters with no deficiencies noted at time of service.
Successfully installed a new 3-ton air conditioning system with matching evaporator coil on the left side of the existing furnace. Connected refrigerant lines to the outdoor condensing unit and performed complete system startup procedures. Verified proper system operation using manifold gauges, confirming refrigerant pressures of 205.0 PSI suction and 205.4 PSI discharge with ambient temperature reading of 100.1°F. All electrical connections completed to manufacturer specifications, including reconnection of thermostat wiring and power supply. System tested and running efficiently with proper airflow through ductwork.
Completed installation of new air conditioning unit and evaporator coil system. Verified proper refrigerant pressures and system operation using digital manifold gauges, confirming all readings within manufacturer specifications. Installed and programmed Honeywell Home smart thermostat for climate control, ensuring proper communication with new equipment and customer understanding of operation.
Conducted on-site evaluation for air conditioning replacement at residential property. Assessed existing HVAC system including basement-mounted furnace with connected ductwork and piping infrastructure. Inspected exterior utility connections and meter location to determine compatibility requirements for new AC unit installation. Documented current equipment configuration, ductwork routing through exposed ceiling joists, and available space for condensing unit placement in landscaped area adjacent to brick foundation. Photographed existing system components and exterior installation site to develop accurate replacement estimate and equipment specifications.
Completed Club AC12-4 preventive maintenance agreement visit on residential air conditioning and heating system. Performed standard system inspection including amperage draw testing on compressor unit, which measured 7.01 amps AC on the outdoor condensing unit, indicating normal operating parameters. Verified and documented humidity control settings on Aprilaire humidifier, confirming proper configuration with dial positions ranging from OFF through 15%, 25%, 35%, and 45% humidity levels with corresponding outdoor temperature recommendations. All equipment operating within manufacturer specifications with no deficiencies noted at time of service.
